GHHY-2B-300.00/9

Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks each, with a size of 300 mm, are used in this clamping device for machining the ends of axles.

The chucks can be moved on the device. Actuation is by hydraulic means via laterally mounted cylinders. The work piece is aligned both via the middle unit, the pre-alignment guides as well as the swivel alignment guide on the chuck. The work piece is clamped with forming jaws. The clamping device has a connection for central lubrication.

Type: GHHY, two-jaw chucks

Item No.: 300.050

Actuation: hydraulic with integrated cylinder

Technical features:

Jaw stroke 46 mm at a size of 300 mm
Power transmission using the wedge system
Steel design, all wear and tear parts hardened and polished
Laterally mounted cylinder
Additional swivel alignment guide integrated into chuck body
One chuck can be moved and clamped on the device

Highlights Clamping fixtures:

GHHY-2B-300.00/9

Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks each, with a size of 300 mm, are used in this clamping device for machining the ends of axles...

GHZP-195.00/1

The challenge for this device was to realise numerous functions with only four connections. The GHZP-195.00/1 is one of several clamping devices made by us for clamping parts for turbo loaders...

GHYP-180.00/Bl

This hydraulic multiple clamping device was fitted with 12 clamping nests for machining ABS housings...

GHM-2B-200.00

This hydraulic multiple clamping fixture was fitted with 12 clamping nests for machining gas valves...

GHHY-2B-250.00/23-2

The GHHY-2B-250.00/23-2 is only one of many clamping devices manufactured by Geiger + Haag which are used to machine cams...

GH-2B-80.00/1/A

The GH-2B-80.00/1/A is a power-operated centring element for aligning and clamping piston rods...

GHGLS-3B-70.00

This sliding jaw expansion mandrel clamps the work piece from the outside. Clamping is via springs, release is performed pneumatically...

GHHY-2x2B-400.00

The GHHY-2x2B-400.00 is an hydraulic double clamping device with integrated cylinder. It can clamp work pieces of different sizes...