GH-2B-80.00/1/A

The GH-2B-80.00/1/A is a power-operated centring element for aligning and clamping piston rods. Off-centre, the clamping jaws feature the curved internal contour of the work piece on the clamping surface. The centring element is connected to the central lubrication. Actuation is via a quick-acting bayonet closure at the piston.

Type: GH, centering element

Item No.: 80.052

Actuation: power-operated

Technical features:

Power transmission using the wedge system
Steel design, all wear and tear parts hardened and polished
central lubrication
bayonet nut connector at the piston

Highlights Clamping fixtures:

GHHY-2B-300.00/9

Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks each, with a size of 300 mm, are used in this clamping device for machining the ends of axles...

GHZP-195.00/1

The challenge for this device was to realise numerous functions with only four connections. The GHZP-195.00/1 is one of several clamping devices made by us for clamping parts for turbo loaders...

GHYP-180.00/Bl

This hydraulic multiple clamping device was fitted with 12 clamping nests for machining ABS housings...

GHM-2B-200.00

This hydraulic multiple clamping fixture was fitted with 12 clamping nests for machining gas valves...

GHHY-2B-250.00/23-2

The GHHY-2B-250.00/23-2 is only one of many clamping devices manufactured by Geiger + Haag which are used to machine cams...

GH-2B-80.00/1/A

The GH-2B-80.00/1/A is a power-operated centring element for aligning and clamping piston rods...

GHGLS-3B-70.00

This sliding jaw expansion mandrel clamps the work piece from the outside. Clamping is via springs, release is performed pneumatically...

GHHY-2x2B-400.00

The GHHY-2x2B-400.00 is an hydraulic double clamping device with integrated cylinder. It can clamp work pieces of different sizes...