GHHY-2x2B-400.00

The GHHY-2x2B-400.00 is an hydraulic double clamping device with integrated cylinder. It can clamp work pieces of different sizes. Hydraulic pump housings are machined on the double clamping device illustrated here. At a size of 400 mm the device allows a jaw stroke of 43 mm per jaw. The hydraulic pump housing is clamped via two fixed clamps and two oscillating clamps. The actual clamping is performed via geared clamping inserts.

Type: GHHY, dual chuck

Item No.: 400.008

Actuation: hydraulic with integrated cylinders

Technical features:

Power transmission using the wedge system
Steel design, all wear and tear parts hardened and polished
Central lubrication
Fixed and oscillating clamping jaws with clamping inserts

Highlights Clamping fixtures:

GHHY-2B-300.00/9

Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks each, with a size of 300 mm, are used in this clamping device for machining the ends of axles...

GHZP-195.00/1

The challenge for this device was to realise numerous functions with only four connections. The GHZP-195.00/1 is one of several clamping devices made by us for clamping parts for turbo loaders...

GHYP-180.00/Bl

This hydraulic multiple clamping device was fitted with 12 clamping nests for machining ABS housings...

GHM-2B-200.00

This hydraulic multiple clamping fixture was fitted with 12 clamping nests for machining gas valves...

GHHY-2B-250.00/23-2

The GHHY-2B-250.00/23-2 is only one of many clamping devices manufactured by Geiger + Haag which are used to machine cams...

GH-2B-80.00/1/A

The GH-2B-80.00/1/A is a power-operated centring element for aligning and clamping piston rods...

GHGLS-3B-70.00

This sliding jaw expansion mandrel clamps the work piece from the outside. Clamping is via springs, release is performed pneumatically...

GHHY-2x2B-400.00

The GHHY-2x2B-400.00 is an hydraulic double clamping device with integrated cylinder. It can clamp work pieces of different sizes...