spanntechnik

Finding a way among the many requirements

Work pieces with unusual shapes, formats and weights can often not be adequately clamped with standard chucks. They require specific solutions.

Geiger + Haag offer many years of broad experience in solving questions for which there appear to be no answers at first sight, or only difficult ones. Our solutions are often exceedingly elegant, sometimes even exceptional.

If you are looking for exceptional concepts and highly effective solutions, or if other manufacturers cannot help you, simply contact us.

    • GHHY-2B-300.00/9: End machining of axles
    • GHZP-195.00/1: Machining of turbo loaders
    • GHYP-180.00/Bl: Machining of ABS housings
    • GHM-2B-200.00: Machining of gas valves
    • GHHY-2B-250.00/23-1: Machining of cams
    • GH-2B-80.00/1/A: Alignment of piston rods
    • GHGLS-3B-70.00: Machining of injection nozzles
    • GHHY-2x2B-400.00: Maching of housings for hydraulic pumps

    Highlights Clamping fixtures:

    GHHY-2B-300.00/9

    GHHY-2B-300.00/9

    Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks each, with a size of 300 mm, are used in this clamping device for machining the ends of axles...


    GHZP-195.00/1

    GHZP-195.00/1

    The challenge for this device was to realise numerous functions with only four connections. The GHZP-195.00/1 is one of several clamping devices made by us for clamping parts for turbo loaders...


    GHYP-180.00/Bl

    GHYP-180.00/Bl

    This hydraulic multiple clamping device was fitted with 12 clamping nests for machining ABS housings...


    GHM-2B-200.00

    GHM-2B-200.00

    This hydraulic multiple clamping fixture was fitted with 12 clamping nests for machining gas valves...


    GHHY-2B-250.00/23-2

    GHHY-2B-250.00/23-2

    The GHHY-2B-250.00/23-2 is only one of many clamping devices manufactured by Geiger + Haag which are used to machine cams...


    GH-2B-80.00/1/A

    GH-2B-80.00/1/A

    The GH-2B-80.00/1/A is a power-operated centring element for aligning and clamping piston rods...


    GHGLS-3B-70.00

    GHGLS-3B-70.00

    This sliding jaw expansion mandrel clamps the work piece from the outside. Clamping is via springs, release is performed pneumatically...


    GHHY-2x2B-400.00

    GHHY-2x2B-400.00

    The GHHY-2x2B-400.00 is an hydraulic double clamping device with integrated cylinder. It can clamp work pieces of different sizes...



    © 1995-2011 Geiger + Haag GmbH Spanntechnik, Industriestraße 11, 73463 Westhausen, Tel.: +49 7363 / 9612-0,  info@geiger-haag.de | Disclaimer | Data Protection