GHGL-3B-17.00

The GHGL-3B-17.00 is a sliding jaw expansion mandrel with 3 jaws. They are used for aligning piston rods. The sliding jaws have a diameter of 6 mm, the clamping range has a diameter of 16.9 - 18 mm. Actuation is mechanical, release is spring-loaded. The sliding jaw expansion mandrel is fitted with a connection for central lubrication.

Type: GHGL, sliding jaw expansion mandrel with three jaws

Item No.: 17.001

Actuation: hydraulic on machine side

Technical features:

Steel design, all wear and tear parts hardened and polished
Jaw stroke of 1.05 mm at a diameter of 17 mm
Spring release
Central lubrication

Options:

GHGL-3B-17.00

The GHGL-3B-17.00 is a sliding jaw expansion mandrel with 3 jaws. They are used for aligning piston rods. The sliding jaws have...

GHGL-5B-70.00

The GHGL-5B-70.00 is fitted with 5 jaws. Each of the sliding jaws has a diameter of 14 mm and a recess at the clamp point. The clamping range at the diameter is 66.9 to 75.5 mm...

GHGL-2B-37.00

Sliding jaw expansion mandrel with 2 rectangular jaws, integrated tail rod and cylinder, with a clamp stroke of approx. 12 mm per jaw...

GHGLP-2B-60.00

The GHGLP-2B-60.00 is a sliding jaw expansion mandrel with 2 jaws. The rectangular sliding jaws are...

GHGL-4B-50.00/1

The mechanically actuated sliding jaw expansion mandrel has an adjusting function for clamping different diameters. Two of the sliding jaws...

GHGL-3B-65.00

This sliding jaw expansion mandrel operates with three jaws, each with 10 mm diameter. The extremely large clamping range has...