GHGL-4B-50.00/1

The mechanically actuated sliding jaw expansion mandrel has an adjusting function for clamping different diameters. Two of the sliding jaws clamp the inner diameters mechanically, the other two sliding jaws follow as adjusters. The piston stroke is limited by stops. The mandrel is lubricated via a central connection.

Type: GHGL, sliding jaw expansion mandrel with four jaws and adjustment

Item No.: 50.007

Actuation: hydraulic on machine side

Technical features:

Steel design, all wear and tear parts hardened and polished
Jaw stroke of 1.9 mm at a diameter of 50 mm
Central lubrication
two of the four sliding jaws are adusting

Options:

GHGL-3B-17.00

The GHGL-3B-17.00 is a sliding jaw expansion mandrel with 3 jaws. They are used for aligning piston rods. The sliding jaws have...

GHGL-5B-70.00

The GHGL-5B-70.00 is fitted with 5 jaws. Each of the sliding jaws has a diameter of 14 mm and a recess at the clamp point. The clamping range at the diameter is 66.9 to 75.5 mm...

GHGL-2B-37.00

Sliding jaw expansion mandrel with 2 rectangular jaws, integrated tail rod and cylinder, with a clamp stroke of approx. 12 mm per jaw...

GHGLP-2B-60.00

The GHGLP-2B-60.00 is a sliding jaw expansion mandrel with 2 jaws. The rectangular sliding jaws are...

GHGL-4B-50.00/1

The mechanically actuated sliding jaw expansion mandrel has an adjusting function for clamping different diameters. Two of the sliding jaws...

GHGL-3B-65.00

This sliding jaw expansion mandrel operates with three jaws, each with 10 mm diameter. The extremely large clamping range has...