spanntechnik

Chucks with through-hole

The through-hole in clamping devices serves different purposes:

    • The transfer of media, such as coolants
    • The transfer of materials for the work piece
    • Withdrawal of the tool for certain processing steps
    • Recessed clamping of the work piece to achieve lower clamping heights

     

    The following are examples of realised chucks with through-holes.

     


    Options:

    GHHHY-3B-200.00/1

    GHHHY-3B-200.00/1

    This hydraulically actuated three-jaw chuck with integrated cylinder and through-hole has an air query at the work piece support...


    GHHHYS-2B-250-30.00/1

    GHHHYS-2B-250-30.00/1

    This hydraulically actuated two-jaw chuck has the following features...


    GHHHY-2B-170.00

    GHHHY-2B-170.00

    This hydraulically actuated two-jaw chuck is fitted with an integrated cylinder and...


    GHHHY-3B-250.00

    GHHHY-3B-250.00

    The hyraulically actuated three-jaw chuck GHHHY-3B-250.00 is fitted with an integrated cylinder. The through-hole has a diameter of 75 mm...


    GHHZ-3B-80.00

    GHHZ-3B-80.00

    The GHHZ-3B-80 is an hydraulically actuated down-pull chuck for external clamping...



    © 1995-2011 Geiger + Haag GmbH Spanntechnik, Industriestraße 11, 73463 Westhausen, Tel.: +49 7363 / 9612-0,  info@geiger-haag.de | Disclaimer | Data Protection