GHGL-4B-50.00/1

The mechanically actuated sliding jaw expansion mandrel has an adjusting function for clamping different diameters. Two of the sliding jaws clamp the inner diameters mechanically, the other two sliding jaws follow as adjusters. The piston stroke is limited by stops. The mandrel is lubricated via a central connection.

Type: GHGL, sliding jaw expansion mandrel with four jaws and adjustment

Item No.: 50.007

Actuation: hydraulic on machine side

Technical features:

Steel design, all wear and tear parts hardened and polished
Jaw stroke of 1.9 mm at a diameter of 50 mm
Central lubrication
two of the four sliding jaws are adusting

Options:

GHA-3B-160.00/1

The GHA-3B-160.00/1 is a compensating three-jaw chuck which centres the work piece with a clamping sleeve and...

GHGL-4B-50.00/1

The mechanically actuated sliding jaw expansion mandrel has an adjusting function for clamping different diameters...

GHHYA-2B-160.00/2

The GHHYA-2B-160.00/2 is an hydraulically actuated two-jaw chuck with integrated cylinder, work piece support and clamping jaws...