GHPPS-3B-125.60

In the pneumatically actuated multiple clamping device with six three-jaw chucks with angled jaw guides, the work piece is drawn virtually free of deformation to the support by the down-pull component of the encircling clamping jaws. Lubrication is performed manually via lubricating nipples on the base jaw.

Type: GHPPS, multiple clamping with six three-jaw chucks with angled jaw guide

Item No.: 1.70801

Actuation: pneumatic with integrated cylinder

Technical features:

Steel design, all parts hardened and polished
Angled jaw guidance for down-pull effect
Manual lubrication via lubricating nipples
Power transmission using the wedge system

Options:

GHP-300.00/3

The photo depicts an hydraulically actuated multiple clamping device, the work piece positioning is via work piece support...

GHPPS-3B-125.60

In the pneumatically actuated multiple clamping device with six three-jaw chucks with angled jaw guides, the work piece is...

GHP-300.00/6

In this hydraulically actuated multiple clamping device the work piece is positioned with pins and face clamping is facilitated by swivel clamps at two points...

GHZP-300.00/1

The photo depicts an hydraulically actuated multiple clamping device with two clamping levels...

GHP-300.00/5

The GHP-300.00/5 is an hydraulically actuated multiple clamping device for machining flanges...

GHHY-90.00/K

This hydraulically actuated multiple clamping device is fitted with four three-jaw chucks with integrated cylinders...

GHZHY-3B-160.00

The GHZHY-3B-160.00 is an hydraulically actuated multiple clamping device with clamping bolt chuck. The work pieces...

GHM-2B-200.00

This multiple clamping device is fitted with three two-jaw chucks on each side. Coarse adjustment of the jaw position is via a hand crank...