GHM-2B-200.00

This multiple clamping device is fitted with three two-jaw chucks on each side. Coarse adjustment of the jaw position is via a hand crank. Then the work piece is inserted and retained via spring loading. After loading of all stations the work pieces are clamped simultaneously by hydraulic means.

Type: GHHY, two-jaw chuck with spring-loaded pre-clamping.

Item No.: 200.108

Actuation: hydraulic with integrated cylinder

Technical features:

Power transmission using the wedge system
Steel design, all wear and tear parts hardened and polished
Spring-loaded pre-clamping of work pieces

Options:

GHP-300.00/3

The photo depicts an hydraulically actuated multiple clamping device, the work piece positioning is via work piece support...

GHPPS-3B-125.60

In the pneumatically actuated multiple clamping device with six three-jaw chucks with angled jaw guides, the work piece is...

GHP-300.00/6

In this hydraulically actuated multiple clamping device the work piece is positioned with pins and face clamping is facilitated by swivel clamps at two points...

GHZP-300.00/1

The photo depicts an hydraulically actuated multiple clamping device with two clamping levels...

GHP-300.00/5

The GHP-300.00/5 is an hydraulically actuated multiple clamping device for machining flanges...

GHHY-90.00/K

This hydraulically actuated multiple clamping device is fitted with four three-jaw chucks with integrated cylinders...

GHZHY-3B-160.00

The GHZHY-3B-160.00 is an hydraulically actuated multiple clamping device with clamping bolt chuck. The work pieces...

GHM-2B-200.00

This multiple clamping device is fitted with three two-jaw chucks on each side. Coarse adjustment of the jaw position is via a hand crank...