An hydraulically actuated Hydrozent chuck in two-jaw design with integrated cylinder, only slightly modified from the basic version.
Type: GHHY, two-jaw chuck
Item No.: 400.009
Actuation: hydraulic with integrated cylinder
Technical features:
The GH-2B-300.00/8 is an hydraulically actuated Hydrozent chuck in two-jaw design...
The hydraulically actuated Hydrozent chuck in three-jaw design offers the following features...
An hydraulically actuated Hydrozent chuck in two-jaw design with integrated cylinder, only slightly modified from the basic version...
This hermetically sealed and hydraulically actuated Hydrozent clamp with three-jaw design is fitted with a straight jaw guide...
The hydraulically actuated Hydrozent chuck in two-jaw design with position control mountable on both sides is fitted with...
Hydraulically actuated two-jaw chuck with integrated cylinder and partial channel, blow air, sealing air, and...
Hydraulically actuated two-jaw chuck with safety function. The work piece is arrested by...
Two Hydrozent chucks GHHY-2B-130.00/22 are positioned on a bracket and are actuated centrally by hydraulic means...
Two GHHY-2B-300.00/9 two-jaw Hydrozent chucks each, with a size of 300 mm, are used in this clamping device for machining the ends of axles...
© 1995-2011 Geiger + Haag GmbH Spanntechnik, Industriestraße 11, 73463 Westhausen, Tel.: +49 7363 / 9612-0, info@geiger-haag.de | Disclaimer | Data Protection
Diese Seite benutzt ausschliesslich technisch notwendige Cookies. Durch die Nutzung dieser Website erklären Sie sich mit der, in unserer Datenschutzerklärung beschriebenen, Verwendung von Cookies einverstanden.